Specifications of aluminum
These alloys meet international standards and the requirements of applications in terms of strength, toughness, corrosion resistance, and fatigue resistance, etc. Product characteristics are compared in the following table. If you need products with characteristics that are not shown in the table, or you need other special aluminum alloys, please get in touch with us and we will be happy to come up with satisfactory custom solutions.
| Alloy | Temper | UTS(MPa) | YSb(MPa) | ε(％) | Formability (note 1) | Resistance to Corrosionb(noyte1) | Fatique Strength(note 1、2) | |||
| General | SCC | |||||||||
| 6XXX | Al-Mg-Si | 6056 | T6 | 375 | 340 | 12 | B | B | B | B |
| 6060 | T6 | 215 | 195 | 20 | A | B | B | B | ||
| 6061 | T6 | 310 | 275 | 14 | A | B | A | C | ||
| 6063 | T6 | 250 | 210 | 16 | A | B | A | C | ||
| 6069 | T6 | 400 | 370 | 12 | B | B | B | B | ||
| 6082 | T6 | 315 | 295 | 14 | B | B | B | B | ||
| 6101 | T6 | 210 | 185 | 14 | A | B | B | B | ||
| T63 | 195 | 170 | 18 | A | B | B | B | |||
| 7XXX | Al-Zn-Mg | 7003 | T6 | 375 | 330 | 14 | A | B | C | C |
| 7005 | T53 | 355 | 310 | 16 | A | B | C | C | ||
| 7046 | T6 | 475 | 410 | 12 | B | B | B | B | ||
| Al-Zn-Mg-Sc | M7E | T6 | 500 | 460 | 12 | B | B | A | A | |
| Al-Zn-Mg-Cu | 7050S | T76 | 600 | 570 | 13 | C | C | A | A | |
| 7068 | T6 | 675 | 660 | 12 | C | C | A | A | ||
| 7075 | T6 | 630 | 570 | 12 | C | C | A | A | ||
| Al-Zn-Mg-Cu-Sc | M9H4 | T76 | 690 | 670 | 11 | C | C | A | A | |
| M9I2 | T76 | 715 | 680 | 12 | C | C | A | A | ||
note 1： A：Excellent B：Good C：Fair D：Poor
note 2：*K1c(T-L)=30.6(Mpa√m)